LIGHT PANELS

Right here at LGS Marine Lighting!

There are several reasons why LED lights may flicker or dim. Some of the most common causes include: Loose or faulty connections in the wiring or circuitry of the LED light or fixture. Incompatibility between the LED lights and the dimmer switch or other electrical components. Power surges or fluctuations in the electrical supply. Damage or degradation of the LED bulbs or fixtures over time. Interference from other electronic devices or appliances. If your LED lights are flickering, it is important to identify and address the underlying cause to prevent further problems and ensure the safe and effective operation of the lights.

The main difference between T8 and T12 lights is the diameter of the bulb. T8 lights are 8/8 of an inch (or 1 inch) in diameter, while T12 lights are 12/8 of an inch (or 1.5 inches) in diameter. Because of their larger size, T12 lights are typically less energy-efficient and have a shorter lifespan than T8 lights. However, they are also less expensive and may be a suitable option for certain applications. T8 and T12 lights are both types of tubular bulbs, and are commonly used in commercial and industrial lighting applications. They are available in a range of colors and wattages, and can be used in a variety of fixtures to provide bright and efficient illumination.

In lighting, the term "T8" refers to the diameter of a fluorescent or led light bulb. The "T" stands for "tubular" and the number represents the diameter of the bulb in eighths of an inch. A T8 light bulb is 8/8 of an inch (or 1 inch) in diameter, which is slightly larger than other common sizes such as T5 or T12. T8 bulbs are typically used in linear fluorescent fixtures or strip lights, and are known for their energy efficiency and long lifespan. They are often used in commercial and industrial lighting applications, and are available in a range of colors and wattages to suit different needs and preferences.

A T8 light is a type of fluorescent light bulb that is commonly used in commercial and industrial lighting applications. The "T8" designation refers to the diameter of the bulb, which is 8/8 of an inch (or 1 inch) in diameter. T8 lights are typically longer and narrower than other types of fluorescent bulbs, and are often used in linear fluorescent fixtures or strip lights. They are available in a range of colors and wattages, and are known for their energy efficiency and long lifespan. T8 lights are often used in offices, schools, hospitals, and other large buildings to provide bright and efficient lighting.

A downlight is a type of lighting fixture that is designed to direct light downwards, providing illumination to the space below. Downlights are typically installed into the ceiling of a room, and are available in a range of sizes and styles to suit different applications. They are often used to provide task lighting or accent lighting, and can be used in combination with other lighting techniques to create a cohesive and attractive lighting design. Downlights are available in a variety of bulb types, including incandescent, halogen, and LED, and can be controlled using dimmer switches or other means to adjust the intensity and direction of the light.

The size of LED downlights that you need will depend on the size and layout of the room, the desired level of illumination, and the type of bulb used. As a general rule, larger rooms will require larger downlights, while smaller rooms may be suitable for smaller downlights. The brightness of the LED bulbs and the spacing of the downlights will also affect the size of the fixtures that are needed. For example, if you are using LED bulbs with a high wattage, you may be able to use smaller downlights that are spaced closer together to achieve the desired level of brightness. It is important to consider all of these factors and consult with a lighting expert or refer to the manufacturer's recommendations to determine the appropriate size of LED downlights for your specific needs.

The spacing of downlights, also known as "recessed lights" or "can lights," should be determined based on the size and layout of the room, the type of bulb used, and the desired level of illumination. As a general rule, downlights should be spaced evenly throughout the room to provide balanced and uniform lighting. In a rectangular room, the downlights can be spaced at regular intervals along the length of the room, with the exact spacing depending on the size of the room and the brightness of the bulbs. For example, in a 10 foot by 15 foot room, downlights with 50 watt bulbs could be spaced about 2 feet apart. However, the spacing may need to be adjusted based on the specific conditions and requirements of the room. It is important to consult with a lighting expert or refer to the manufacturer's recommendations to ensure that the downlights are spaced properly for your specific needs.

Linear vapor proof lights are a type of lighting fixture that is specifically designed to be used in damp or wet locations where the risk of vapor or moisture ingress is high. These fixtures are typically used in industrial or outdoor settings where they are exposed to dampness, water, or other potentially corrosive substances. There are also Intrinsically Safe LVP's commonly used in areas where flammable vapors or gases are present. Linear vapor proof lights are constructed with special materials and seals that are resistant to moisture and vapor, and they are designed to prevent water or moisture from entering the electrical components of the fixture. These fixtures are often sealed with gaskets or O-ring seals, and they may also have special coatings or finishes that provide additional protection against corrosion. Linear vapor proof lights are typically used in a wide range of applications, including warehouses, factories, garages, parking lots, and other commercial or industrial spaces. They are also commonly used in outdoor areas such as tunnels, underpasses, and other locations where moisture or vapor is a concern.

For a bedroom, we recommended to use a lower color temperature light, around 2700-3000K, as it will create a warm and cozy atmosphere that is conducive to relaxation and sleep. Higher color temperature lights, such as those around 5000K, can be more stimulating and may not be as suitable for use in a bedroom setting, and are typically seen in offices and work environments.

The lifespan of LED flood lights can vary depending on several factors, such as the quality of the bulbs, the operating temperature, and the number of hours they are used per day. On average, LED flood lights can last for about 25,000 to 50,000 hours of use, which is much longer than traditional halogen or incandescent flood lights. This means that LED flood lights can provide reliable and long-lasting illumination for many years, making them a cost-effective and energy-efficient lighting solution. Additionally, LED flood lights do not burn out or fail abruptly, but instead gradually lose brightness over time, so they can continue to provide usable light for many years before they need to be replaced

When specifying LED flood lights, there are several factors to consider to ensure that you choose the right fixtures for your needs. Some of the key considerations include the size and type of the area that needs to be illuminated, the desired level of brightness, the color temperature of the lights, and the beam angle. You should also consider the type and quality of the LED bulbs, as well as the design and durability of the fixtures themselves. It is also important to consider the environmental conditions in which the flood lights will be used, and to choose fixtures that are suitable for outdoor use and resistant to water and other elements.

The number of lumens required for an outdoor flood light will depend on the size of the area that needs to be illuminated and the desired level of brightness. As a general rule, outdoor flood lights should have a minimum of 800 to 1000 lumens to provide sufficient illumination for most applications. However, larger areas or spaces with high ceilings may require more powerful flood lights with higher lumens. It is also important to consider the color temperature of the flood lights, as well as the beam angle and other factors that can affect the quality and effectiveness of the lighting.

Flood lights are available in a range of sizes to suit different applications and needs. The size of a flood light is typically determined by the diameter of the bulb or the width of the fixture. Common sizes of flood lights include 10 inches, 12 inches, and 14 inches, although larger and smaller sizes are also available. The size of the flood light should be chosen based on the size and type of the area that needs to be illuminated, as well as the desired level of brightness and the placement of the fixture. It is important to choose the right size flood light to ensure that it provides sufficient illumination and covers the desired area without wasting energy or creating glare or other unwanted effects.

Choosing the right placement and spacing for deck lights on a ship is an important decision that can help ensure the safety of personnel working on board as well as enhance visibility during night time operations. Proper placement and spacing of deck lights can also reduce glare and make it easier to navigate in low light conditions. To maximize their utility, it is important to choose the right location, spacing, and number of deck lights for each application. When selecting a location for deck lights, consideration should be given to any obstructions or potential sources of interference. Lights should be placed high enough off the deck so they are not blocked by cargo or other items on board, as well as far enough away from overhead structures such as antennas or masts. They should also be positioned where they will not interfere with other equipment, such as radar systems or navigation displays. If possible, it is best to place deck lights on opposite sides of the vessel for maximum coverage; this way all areas on board can be illuminated with minimal obstruction or interference. The number of deck lights needed will depend largely on the size and layout of the vessel and its intended use; larger vessels may require more lighting than smaller ones. The amount of space between each light should also be taken into account; too much space between fixtures can result in inadequate illumination, while too little space can lead to excessive glare which can impede visibility further. As a general rule, there should be about four-six feet of space between each fixture when installed horizontally across decks or walls, and around three feet when mounted vertically along bulkheads and corners. In addition to location and spacing considerations, it is important to select the right type(s) of lighting for each application. Depending on the job at hand, different kinds of lighting may prove more effective than others; halogen bulbs provide excellent brightness but consume more energy than LED lamps typically used in modern ships; fluorescent fixtures are often more economical but tend to flicker while in operation; while incandescent bulbs offer good overall performance but do not last very long compared to LED varieties. In conclusion, selecting the ideal placement and spacing for deck lights on a ship requires careful consideration regarding factors such as location relative to other objects/equipment onboard, distance between fixtures , type(s) of lamps , and potential risks posed by exposed wiring – all these points must be taken into account before making a final decision regarding installation onboard vessels at sea. It is always best practice to consult an expert! Reach out to us if you need additional information

Installing LED Deck Lights is a great way to upgrade the look and safety of your spaces. The process is relatively simple—all you need is the right supplies, some tools, and a bit of patience however, t is always recommended to hire a qualified electrician to ensure your job meets the proper safety and code requirements.

When it comes to deck lighting, the best types of lights to use are LED fixtures, as they are energy-efficient and highly reliable. Not only that, but LED bulbs last much longer than traditional halogen or incandescent bulbs and can be used in a variety of styles and designs. LED deck lights also come in a range of different colors, allowing for customized ambient lighting options. Additionally, since LED lights generate very little heat, they are safer to use outdoors than traditional bulbs, and they require far less maintenance over time.